Devil's Backbone (Kalanchoe daigremontiana)

Formerly Bryophyllum daigremontianum

Give devil's backbone full sun, with part shade as a tolerated alternative, and water it sparingly. Indoors it prefers bright, indirect light. The ASPCA lists this plant as toxic to both cats and dogs. It is winter hardy in zones 9a to 11b and reaches 1–3 ft (0.3–0.91 m) tall.

Quick facts

Each value is the cited value from the sources listed at the end of this page.
Light: Full sun and part shade (full sun preferred)11 source
Water: Dry11 source
Soil: Well drained and occasionally dry11 source
Hardiness: Zones 9a–11b11 source
Size: 1–3 ft (0.3–0.91 m) × 1–2 ft (0.3–0.61 m)11 source
Bloom: Pink and purple11 source
Cats: Toxic to cats (1 source) 2
Dogs: Toxic to dogs (1 source) 2
Native range: MDG3
Family: Crassulaceae

How much light does a Devil's Backbone need?

Outdoors, devil's backbone does best in full sun, meaning six or more hours of direct sunlight a day. It also accepts part shade, though full sun is the preferred setting. Indoors, it prefers bright, indirect sunlight or partial shade. Indoors, bright light that is not direct sun is what it prefers.

  • Light: Full sun and part shade (full sun preferred)1

How often to water a Devil's Backbone

Water this plant sparingly. Its water need is rated dry, at both the low and high ends of the range. The soil it grows in should be well drained and occasionally dry. Sandy or loamy soil that drains well is the type described. Soil that dries out now and then is part of the description.

  • Water: Dry1

Best soil for a Devil's Backbone

Devil's backbone needs soil that drains well and is occasionally dry. It calls for sandy or loamy soil that is well drained. The drainage record lists two conditions, well drained and occasionally dry. Sandy and loamy are the two soil textures named. Root rot is one of the diseases recorded for this plant. Occasionally dry soil is part of the drainage description. No soil pH range is documented for this plant.

  • Soil drainage: Well drained and occasionally dry1

Hardiness and temperature

It is winter hardy in USDA zones 9a to 11b. That record runs from zone 9a at one end to zone 11b at the other. Check your own zone against that range before you plant. Indoors, a spot with bright, indirect light suits it. Outdoors, full sun is preferred. Water this plant sparingly. No minimum temperature or humidity range is documented for this plant.

  • Hardiness: Zones 9a–11b1

How to plant a Devil's Backbone

Plant devil's backbone outdoors in USDA zones 9a to 11b, the winter hardy range on record. Allow 1–2 ft (0.3–0.61 m) of width for each plant. It grows 1–3 ft (0.3–0.91 m) tall and has an erect habit. Its native range is recorded as MDG. In the United States it is listed as introduced in the lower 48 states, Hawaii and Puerto Rico.

  • Hardiness: Zones 9a–11b1

Winter care

The plant is rated winter hardy from zone 9a through zone 11b. No minimum temperature is documented, and no winter protection steps are documented either. Zone 9a is where its hardiness range begins, and zone 11b is where it ends. Plants kept indoors prefer bright, indirect light. Water this plant sparingly. Its soil should be well drained and occasionally dry. Outdoors, it does best in full sun.

  • Hardiness: Zones 9a–11b1

How to propagate a Devil's Backbone

You can propagate devil's backbone from offsets, the method on record for this page. It is described as easy to propagate by harvesting plantlets. The plantlets are tiny and sit along the leaf margins, and you harvest them to start new plants. Offsets are the only propagation method recorded here.

  • Propagation: Offsets1

Common problems

Monitor this plant for mealybugs, aphids and spider mites. The recorded diseases are root rot, powdery mildew and rust. Powdery mildew and rust can occur. These three pests and three diseases are the problems recorded for this plant. Spider mites are among the pests to watch for.

  • Common pests: mealybugs, aphids and spider mites1
  • Common diseases: root rot, powdery mildew and rust1
Pests and diseases recorded for this plant by the sources listed at the end of this page.
ProblemKind
Mealybugs Pest
Aphids Pest
Spider mites Pest
Root rot Disease
Powdery mildew Disease
Rust Disease

Is Devil's Backbone toxic to cats and dogs?

Toxic to cats (1 source) 2 Toxic to dogs (1 source) 2

The ASPCA lists devil's backbone as toxic to cats. The ASPCA also lists devil's backbone as toxic to dogs. For cats, the position on this page is toxic. For dogs, the position on this page is also toxic. The listing is the same for both animals. A toxic listing applies to both of the animals this site covers. No severity rating or list of affected parts is on file for this plant.

Pet-safe alternatives

Recommended supplies

  • Soil: a free-draining mix, and a pot with a drainage hole.

Questions and answers

Is devil's backbone toxic to cats and dogs?
The ASPCA lists devil's backbone as toxic to cats and also as toxic to dogs. The listing gives the same position for both animals.
How much sun does devil's backbone need?
Outdoors it prefers full sun, meaning six or more hours of direct sunlight a day. It also accepts part shade. Indoors it prefers bright, indirect light.
How should I water devil's backbone?
Water this plant sparingly. Its water need is rated dry, and the soil it grows in should be well drained and occasionally dry. Sandy or loamy soil that drains well is the type described.

Sources

  1. NC State Extension Gardener Plant Toolbox. https://plants.ces.ncsu.edu/plants/kalanchoe-daigremontiana/. Accessed 15 October 2026.
  2. ASPCA Animal Poison Control Center. https://www.aspca.org/pet-care/aspca-poison-control/toxic-and-non-toxic-plants/kalanchoe. Accessed 15 October 2026.
  3. Royal Botanic Gardens, Kew (World Checklist of Vascular Plants). https://sftp.kew.org/pub/data-repositories/WCVP/wcvp.zip. Accessed 4 June 2026.

How this page was made

  • Written with AI assistance from the sources listed on this page. AI is never the source of a fact.

How we work